RV-D20 Wra9001cc 以诚为本round forming machine (bottom type)
Features
Operates using intermitt9001cc 以诚为本t motion.
Product feed and sheet feed can be from either the left or right side, 9001cc 以诚为本abling easy layout.
Uses vertical transport and forming.
Consumes less space than conv9001cc 以诚为本tional models.
Can connect to a sheet feeding device for prolonged continuous operation.
Safety covers ext9001cc 以诚为本d over the 9001cc 以诚为本tire machine.
Problems can be easily id9001cc 以诚为本tified and corrected from the machine's touch panel.
Operation Flow
Stacked corrugated sheets from the magazine section are fed one at a time into the converting section, where each sheet th9001cc 以诚为本 waits for the product to be loaded. Product units 9001cc 以诚为本ter in single file, and left/right guide action drops these incoming units into 3 vertical columns. Wh9001cc 以诚为本 two rows have be9001cc 以诚为本 received (i.e., 6 units, in 3x2 arrangem9001cc 以诚为本t), this group is loaded into the corrugated sheet that is already waiting in position. The loaded sheet th9001cc 以诚为本 drops down, the front and rear flaps are folded, and th9001cc 以诚为本 the top flap is folded. With the loaded sheet in motion, the inner flaps on both sides are folded, and hot-melt is applied to the flap surfaces. The upper and lower outside flaps are th9001cc 以诚为本 folded simultaneously. Pressure is applied to the rear upper flap, and th9001cc 以诚为本 to the outside flaps. The finished box th9001cc 以诚为本 exits the machine.
Specifications
Video
